M2200L - 2200 watt solar generator

2200 watt generark solar generator for home backup, camping & RV—built for wholesale, distributors, retailers, and private-label OEM/ODM programs.

Delivers pure sine wave AC, LiFePO4 battery technology, dual-source fast charging (AC + PV), rich I/O with PD 100W USB-C / QC3.0, 12V car socket & DC5521, multi-mode LED lighting, large LCD, and parallel expansion options. With its massive 48V 45000mAh (2000 Wh) LiFePO4 Batteries capacity and advanced pure sine wave inverter, this high-performance power station delivers reliable, clean energy for both indoor and outdoor applications.

2000wh Portable Power Station Advanced Technology

🔋 Advanced BMS Circuit Protection System

• Intelligent Battery Management: Multi-level BMS protection with overvoltage, overcurrent, and overheat protection
• Adaptive Charging Technology: Automatically adjusts charging voltage and speed to optimize device compatibility
• LiFePO4 Safety: Superior thermal stability with 3000+ cycle lifespan
• Smart Monitoring: SOC estimation accuracy within 5% margin for precise power management

⚡ Pure Sine Wave Benefits & Performance

• Clean Power Output: Generates less electrical noise for sensitive equipment
• Equipment Protection: Extends appliance lifespan, reduces heat generation
• Enhanced Efficiency: Equipment runs cooler and more efficiently
• Professional Grade: 0.98 power factor with ≥88% conversion efficiency
• Stable Voltage: 110V/230V selectable with 50/60Hz switchable frequency

🚀 Ultra-Fast Charging Technology

• Dual-Input Charging: Simultaneous AC + Solar charging up to 2200W total input
• Priority Solar Charging: Automatically prioritizes renewable energy sources
• Rapid AC Charging: 1600W maximum AC input, 1.5 hours full charge capability
• MPPT Solar Input: 12V-80V wide range, 650W maximum solar capacity
• Smart Charging Logic: Optimized charging algorithms for maximum battery life

📈 Expandable Power System

• Massive Base Capacity: 2160Wh (2.2kWh) single unit capacity
• Expandable to 11kWh: Add up to 4 additional battery units for maximum expansion
• Parallel Connection: Support for up to 2 auxiliary units for increased power
• Days of Backup Power: Extended runtime for whole-house backup during blackouts
• Modular Design: Future-proof investment with scalable capacity

1) Safety
Durable LiFePO4 pack with multi-layer BMS protections (OV/OC/OT/SC), plus inverter protections and detailed fault codes for serviceability. Verified by environmental and ESD ±4kV contact / ±8kV air tests, vibration, drop, thermal and humidity standards.

2) Large LCD display

Big, legible LCD shows SoC %, AC/DC/USB status, input/output power (AC/PV), remaining time, temperature/fault icons, and fan state—ideal for retail demo and after-sales diagnostics.

3) “Can charge a car” (vehicle support)
Supports 12–24V vehicle charging input for the unit and provides 12V/10A cigarette-lighter output for in-vehicle devices. EV emergency top-up is possible when used with a compatible EV adapter (range gained depends entirely on EV efficiency and adapter—use case only).

4) Parallel / expansion support
Designed to pair with auxiliary units for higher capacity (connect one or up to two auxiliaries per the datasheet; follow the power-down/connect procedure). Great for extended outages and small home backup stacks.

5) Wide applications
Home & emergency backup, camping power & RV/vanlife, jobsite/mobile business, photography & drones, CPAP/non-critical medical gear, and off-grid cabins. Built-in multi-mode LED (high/low/SOS/strobe) doubles as area light and warning light.

Charging performance

• AC wall input: up to 1600W
• Solar MPPT: 12–80V, up to 650W (8.6A max)
• AC + PV simultaneously (PV priority): up to 2200W combined; ~1.5 h full charge in ideal conditions
• Solar-only: ~3.5–6 h with ~650W PV and strong sun
• Pass-through operation: supported (bypass mode when on grid AC input)
  All behaviors and protections follow the inverter/MPPT logic in the datasheet.

Ports & outputs (5 types • up to 15 ports)

• AC output (pure sine): 2400W rated, PF ≈0.98; 110V/60Hz or 230V/50Hz variants; 2–6 AC outlets depending on region/SKU
• USB-C: PD 100W ×1 + PD 18W ×1
• USB-A: QC3.0 18W ×4
• DC5521: 12V/8A ×2
• 12V car socket: 12V/10A ×1
• LED lighting: high / low / SOS / strobe (separate control)
  (Enable DC block via the DC key; protections and recovery per fault-code table.)